1. If you haven’t restore yet, go to phone menu. Press *#06#. It will show your iPhone IMEI.
   Nothing appear after you press *#06#, then it’s confirm you having Baseband problem.
2. Try dial 112. Baseband problem will just show you call failed (it’s emergency call number which must be able to call out in most country, even for a locked iPhone)
3.  Error 1 or -1 in iTunes restored failed. (Only iPhone 6, 6P and older models)
4.  Error 4013 (iPhone 6S, 6SP, 7, 7P, 8, 8P) After fail restored, you still see iTunes logo in your iPhone.

Please note: THIS WILL NOT WORK ON NETWORK BLOCKED PHONES.

Questions:
Why did the problem happen?
A: Usually is because you dropped it too hard.

WHY? My other iPhone doesn’t have this kind of issue even if I drop it thousand of times
A: I can tell you It is the Design Flaw.
Because the baseband IC is sitting middle of the logic board. So when the iPhone7 fell hard on the floor, the long logicboard will get slightly bend on middle and return to a position but…
By so many black glues bound between the PCB and this IC, the joint of this IC will still get cracked or lost contact to the board.

So how to fix it?
A: Most of the cases, it just needs reball the Baseband CPU with a better solder paste which is more durable than Apple. Sometimes even need to repair broken tracks below at this IC.
We must take it out to check.

To do this job, the technician himself MUST BE very skillful and experience. Master of heat control.
Why? Because CPU is SITTING next to it!! If you put too much heat, A10 CPU beside will be shorted or died. CPU’s hundreds of solder balls will be messed up/disturbed by underfilled black glue.

The post iPhone 7/ 7Plus No Service Baseband IC Repair appeared first on xFix.

If you’re having any of the following problems with your iPhone 7 or iPhone 7 plus, it may be down to audio IC disease:-

• One or more of these audio-related problems:-
  • Audio is being dropped at your end on a voice call
  • Person at other end of a voice call can’t hear you, or just gets static
  • Grayed-out/Greyed-out voice memos
  • Greyed out loudspeaker
  • Siri doesn’t respond, as it can’t hear you
• Boot time much longer than usual (around three to five minutes)
• iTunes detects the iPhone, but its screen stays stuck on Apple logo
• Haptic feedback on the phone button works, but (again) screen is stuck at Apple logo stage
• Response after inputting the pass code is laggy

You can see our YouTube channel “xFix Repairs UK” for examples of me carrying out this repair for complete peace of mind.

The post iPhone 7 / 7 Plus Audio IC Repair appeared first on xFix.

Symptoms of iPhone X Charging IC failure:

• Fake charging
• No charger detect Inability to charge a stone dead battery, but can charge a partially charged battery
• Very rapid battery drain
• Heat at Hydra/U2 / Charging  IC chip.(1612A1)
• Auto power on at battery reconnect
• Inability to restore due to dropped USB connection
• Some subset of ‘blue screen’ problems in iPhone 5s and possibly mini retina

What does this service include?

• Board level repair replacement IC
• 2-month Warranty on the repair

What doesn’t this include?

• Shipping to us
• Return Shipping
• Any other Repairs or Parts

It has been proven that non-OEM / non-original chargers cause this issue.

INSTRUCTIONS

Follow the below instructions to send a device to us.

1. Contact us and we can give you a quote for whatever problem you are experiencing. For a quote, go to Contact US and fill out the request- We will reply within 24 business hours.

2. If you are happy with the quote, fill out the REPAIR FORM (PDF) with all your contact and device details. CLICK HERE for download the Repair Form.

3. Send this form with your device to the below address. Be sure to send it with a service that requires a signature so to avoid any issues with us not receiving the device. Royal Mail “Special Delivery” or “1st or 2nd Class Signed For” is a good option.

4. Make sure to have backed up and saved your device data (if possible).

5. Once we receive your device we will enter all your details into our system. This will generate an order number that you will receive by e-mail. You can then track your order by entering your order number on the ORDER TRACKING page of the website. ( TRACKING System is under Construction)

6. Non-board level repair normally takes 1-2 days. Board level micro soldering repairs can take approximately 1-4 weeks depending on how busy we are.

7. On completion of the repair, a  email invoice will be sent requesting payment and You can pay by Debit Card.

8. Once the repair is completed and payment received your device will be shipped.

9. If We can’t fix Your device do You have to pay for anything?

• No Fix = No Fee Policy. (For more info please Read the Repair Form) 
  

We reserve the right to decline any device that we feel is not suitable for repair i.e. device has extensive damage, water damage or previous repair attempts have been made. We only test and guarantees our workmanship for 2 months and nothing else. Please note that if there is any other preexisting faults found on the device after the repair we will not be responsible for that and will still charge you for the original repair. 

Note: Alternatively if you are local we offer a FREE pickup and drop service. Just phone +44-1642688858 to arrange a convenient time for collection. You can even drop it off yourself at our address listed HERE.

The post iPhone X Hydra/Charging IC Repair appeared first on xFix.

Symptoms of iPhone 8/ 8 Plus Charging IC failure:

• Fake charging
• No charger detect Inability to charge a stone dead battery, but can charge a partially charged battery
• Very rapid battery drain
• Heat at Hydra/U2 / Charging  IC chip.(1612A1)
• Auto power on at battery reconnect
• Inability to restore due to dropped USB connection
• Some subset of ‘blue screen’ problems in iPhone 5s and possibly mini retina

What does this service include?

• Board level repair replacement IC
• 2-month Warranty on the repair

What doesn’t this include?

• Shipping to us
• Return Shipping
• Any other Repairs or Parts

It has been proven that non-OEM / non-original chargers cause this issue.

INSTRUCTIONS

Follow the below instructions to send a device to us.

1. Contact us and we can give you a quote for whatever problem you are experiencing. For a quote, go to Contact US and fill out the request- We will reply within 24 business hours.

2. If you are happy with the quote, fill out the REPAIR FORM (PDF) with all your contact and device details. CLICK HERE for download the Repair Form.

3. Send this form with your device to the below address. Be sure to send it with a service that requires a signature so to avoid any issues with us not receiving the device. Royal Mail “Special Delivery” or “1st or 2nd Class Signed For” is a good option.

4. Make sure to have backed up and saved your device data (if possible).

5. Once we receive your device we will enter all your details into our system. This will generate an order number that you will receive by e-mail. You can then track your order by entering your order number on the ORDER TRACKING page of the website. ( TRACKING System is under Construction)

6. Non-board level repair normally takes 1-2 days. Board level micro soldering repairs can take approximately 1-4 weeks depending on how busy we are.

7. On completion of the repair, a  email invoice will be sent requesting payment and You can pay by Debit Card.

8. Once the repair is completed and payment received your device will be shipped.

9. If We can’t fix Your device do You have to pay for anything?

• No Fix = No Fee Policy. (For more info please Read the Repair Form) 
  

We reserve the right to decline any device that we feel is not suitable for repair i.e. device has extensive damage, water damage or previous repair attempts have been made. We only test and guarantees our workmanship for 2 months and nothing else. Please note that if there is any other preexisting faults found on the device after the repair we will not be responsible for that and will still charge you for the original repair. 

Note: Alternatively if you are local we offer a FREE pickup and drop service. Just phone +44-1642688858 to arrange a convenient time for collection. You can even drop it off yourself at our address listed HERE.

The post iPhone 8/ 8 Plus Hydra/U2 IC Repair appeared first on xFix.

Symptoms of iPhone 7/ 7 Plus U2 Charging IC failure:

• Fake charging
• No charger detect Inability to charge a stone dead battery, but can charge a partially charged battery
• Very rapid battery drain
• Heat at Tristar/U2 / Charging  IC chip.
• Auto power on at battery reconnect
• Inability to restore due to dropped USB connection
• Some subset of ‘blue screen’ problems in iPhone 5s and possibly mini retina

What does this service include?

• Board level repair replacement IC
• 2-month Warranty on the repair

What doesn’t this include?

• Shipping to us
• Return Shipping
• Any other Repairs or Parts

It has been proven that non-OEM / non-original chargers cause this issue.

INSTRUCTIONS

Follow the below instructions to send a device to us.

1. Contact us and we can give you a quote for whatever problem you are experiencing. For a quote, go to Contact US and fill out the request- We will reply within 24 business hours.

2. If you are happy with the quote, fill out the REPAIR FORM (PDF) with all your contact and device details. CLICK HERE for download the Repair Form.

3. Send this form with your device to the below address. Be sure to send it with a service that requires a signature so to avoid any issues with us not receiving the device. Royal Mail “Special Delivery” or “1st or 2nd Class Signed For” is a good option.

4. Make sure to have backed up and saved your device data (if possible).

5. Once we receive your device we will enter all your details into our system. This will generate an order number that you will receive by e-mail. You can then track your order by entering your order number on the ORDER TRACKING page of the website. ( TRACKING System is under Construction)

6. Non-board level repair normally takes 1-2 days. Board level micro soldering repairs can take approximately 1-4 weeks depending on how busy we are.

7. On completion of the repair, a  email invoice will be sent requesting payment and You can pay by Debit Card.

8. Once the repair is completed and payment received your device will be shipped.

9. If We can’t fix Your device do You have to pay for anything?

• No Fix = No Fee Policy. (For more info please Read the Repair Form) 
  

We reserve the right to decline any device that we feel is not suitable for repair i.e. device has extensive damage, water damage or previous repair attempts have been made. We only test and guarantees our workmanship for 2 months and nothing else. Please note that if there is any other preexisting faults found on the device after the repair we will not be responsible for that and will still charge you for the original repair. 

Note: Alternatively if you are local we offer a FREE pickup and drop service. Just phone +44-1642688858 to arrange a convenient time for collection. You can even drop it off yourself at our address listed HERE.

The post iPhone 7/ 7 Plus Tristar/U2 IC Repair appeared first on xFix.

Symptoms of iPad Air U2 Charging IC failure:

• Fake charging
• No charger detect Inability to charge a stone dead battery, but can charge a partially charged battery
• Very rapid battery drain
• Heat at Tristar/U2 / Charging  IC chip.
• Auto power on at battery reconnect
• Inability to restore due to dropped USB connection
• Some subset of ‘blue screen’ problems in iPhone 5s and possibly mini retina

What does this service include?

• Board level repair replacement IC
• 2-month Warranty on the repair

What doesn’t this include?

• Shipping to us
• Return Shipping
• Any other Repairs or Parts

It has been proven that non-OEM / non-original chargers cause this issue.

INSTRUCTIONS

Follow the below instructions to send a device to us.

1. Contact us and we can give you a quote for whatever problem you are experiencing. For a quote, go to Contact US and fill out the request- We will reply within 24 business hours.

2. If you are happy with the quote, fill out the REPAIR FORM (PDF) with all your contact and device details. CLICK HERE for download the Repair Form.

3. Send this form with your device to the below address. Be sure to send it with a service that requires a signature so to avoid any issues with us not receiving the device. Royal Mail “Special Delivery” or “1st or 2nd Class Signed For” is a good option.

4. Make sure to have backed up and saved your device data (if possible).

5. Once we receive your device we will enter all your details into our system. This will generate an order number that you will receive by e-mail. You can then track your order by entering your order number on the ORDER TRACKING page of the website. ( TRACKING System is under Construction)

6. Non-board level repair normally takes 1-2 days. Board level micro soldering repairs can take approximately 1-4 weeks depending on how busy we are.

7. On completion of the repair, a  email invoice will be sent requesting payment and You can pay by Debit Card.

8. Once the repair is completed and payment received your device will be shipped.

9. If We can’t fix Your device do You have to pay for anything?

• No Fix = No Fee Policy. (For more info please Read the Repair Form) 
  

We reserve the right to decline any device that we feel is not suitable for repair i.e. device has extensive damage, water damage or previous repair attempts have been made. We only test and guarantees our workmanship for 2 months and nothing else. Please note that if there is any other preexisting faults found on the device after the repair we will not be responsible for that and will still charge you for the original repair.

Note: Alternatively if you are local we offer a FREE pickup and drop service. Just phone +44-1642688858 to arrange a convenient time for collection. You can even drop it off yourself at our address listed HERE.

The post iPad Air – Tristar/U2 IC Repair appeared first on xFix.

The “U2 – Tristar Charging/USB logic IC chip” This chip is easily burned out due to unprotected voltage fluctuations common to use of non-Apple chargers (especially car chargers). This is a common fault and is widespread, we will see devices that show one or more of these symptoms:

If you have one of following issues, this repair is for you:

• Not charging(Even though it may show it is), not recognizing connected cable, “fake charging” where it will show connected cable but won’t charge.
• Fast draining battery, even with brand new one.
• This accessory is not compatible message pop up.
•  iPhone booting up automatically when connecting the battery.
• Not going above 1-5% battery.
• If you have tried a new battery & charging port but still does not charge.

This issue often happens from using non-original chargers. Especially car chargers tend to damage this IC the most. After the repair, be sure to use genuine Apple charger.

INSTRUCTIONS

Follow the below instructions to send a device to us.

1. Contact us and we can give you a quote for whatever problem you are experiencing. For a quote, go to Contact US and fill out the request- We will reply within 24 business hours.

2. If you are happy with the quote, fill out the REPAIR FORM (PDF) with all your contact and device details. CLICK HERE for download the Repair Form.

3. Send this form with your device to the below address. Be sure to send it with a service that requires a signature so to avoid any issues with us not receiving the device. Royal Mail “Special Delivery” or “1st or 2nd Class Signed For” is a good option.

4. Make sure to have backed up and saved your device data (if possible).

5. Once we receive your device we will enter all your details into our system. This will generate an order number that you will receive by e-mail. You can then track your order by entering your order number on the ORDER TRACKING page of the website. ( TRACKING System is under Construction)

6. Non-board level repair normally takes 1-2 days. Board level micro soldering repairs can take approximately 1-4 weeks depending on how busy we are.

7. On completion of the repair, a  email invoice will be sent requesting payment and You can pay by Debit Card.

8. Once the repair is completed and payment received your device will be shipped.

9. If We can’t fix Your device do You have to pay for anything?

• No Fix = No Fee Policy. (For more info please Read the Repair Form) 
  

We reserve the right to decline any device that we feel is not suitable for repair i.e. device has extensive damage, water damage or previous repair attempts have been made. We only test and guarantees our workmanship for 2 months and nothing else. Please note that if there is any other preexisting faults found on the device after the repair we will not be responsible for that and will still charge you for the original repair. 

Note: Alternatively if you are local we offer a FREE pickup and drop service. Just phone +44-1642688858 to arrange a convenient time for collection. You can even drop it off yourself at our address listed HERE.

The post iPhone 6/ 6 Plus Tristar/U2 IC Repair appeared first on xFix.

If you have a damaged on of FPC connectors on the logic board, send it in for repair. This is for any one of the connectors on the logic board:

1. Charging FPC Connector 
2. Battery FPC Connector Repair 
3. Power Volume Button FPC Connector 
4. Front Facing Camera/Earpiece FPC 
5. LCD FPC Connector
6. Touch FPC Connector 
7. Back Rear Camera FPC Connector
8. Home Button FPC Connector 

The post iPhone 6/ 6 Plus FPC Connector Repair appeared first on xFix.

Don’t Worry!! You have come to the right place.

We are Micro soldering Experts

Mail-in repair service for Apple iPhone 6/ 6 plus with ERROR 4013/4014 problem. During the restore or phone update, you get the error 4013/4014 or the phone shows the apple logo and keeps restarting.

Get your phone fixed in no time, fast turnaround service, we restore and fix the NAND chip and the most important our repair comes with a warranty.

We are not responsible for any problems with the phone ( no image, liquid damage, no power ). This is a service for ERROR 4013/4014 repair if your phone has other problems please Contact Us.

Turn-Around for the repair is 4-14 days after we receive the phone

2 Months warranty

The post iPhone 6/ 6 Plus Error 4013 Repair appeared first on xFix.

The good news is The xFix Repair’s expert technicians are able to replace your backlight chipset.

This repair includes replacing:

• Backlight Filter
• Backlight Capacitors (3)
• Backlight IC Chip
• Backlight Diode
• Backlight Coil

Often times not all the components on the iPhone 6 backlight chipset will fail, but since you’re mailing your phone in, we replace all components to ensure that whatever caused your backlight to go out in the first place will not happen again.

Please back up your device as The xFix Repairs is not responsible for lost data.

The post iPhone 6/ 6 Plus Backlight Repair appeared first on xFix.